Patriotic Houndstooth Plaid
by Sharon Norbutas
Try this winning new technique!
QUILT SIZE: 17 1/2"
BLOCK SIZE: 2 1/2" square
MATERIALS
Yardage is estimated for 44" fabric.
- 1/4 yard each of 9 different reds
- 1/4 yard each of 9 different blues
- 1/8 yard gold lamé
- 1/8 yard silver lamé
- 1/2 yard of blue for the border and binding
- 18" square piece of backing fabric
- 18" square piece of batting
- Paper - copier weight
- Permanent marking pen
- Heavyweight gold and silver metallic thread
- Clear template plastic
- Lightweight fusible interfacing (optional) NOTE: This is a very challenging piece
and we strongly recommend making several sample blocks from scraps before beginning.
PREPARATION
- Cut twenty-five 4" squares of paper.
- Center each 4" square over the full-size pattern. Transfer the design to the paper
using a permanent ink pen. Hold the square over a light box or up to a brightly lit window
and trace the design on the back side of the paper, also.
- Make clear plastic templates of the 3 stars.
- Trace around the star templates on the gold and silver lamé. You may find it easier to
work with the lamé after fusing a lightweight interfacing to the back. Carefully follow
manufacturer's directions. Trace 2 large, 3 medium and 1 small gold star. Trace 1 large, 3
medium and 1 small silver star. Add 3/16" turn-under allowance as you cut them out.
- Cut out an 18" square from the blue border fabric.
- Make a full-size paper pattern of the quilt blocks placed in 5 rows of 5, eliminating
the seam allowances. There is no need to draw the strips in the blocks. Center the paper
pattern over the 18" square of blue fabric. Trace the pattern outline on the fabric.
- Cut out the center of the fabric 3/16" from the pattern line to create the border.
CUTTING
Dimensions include seam allowances.
- Cut 13: bias strips 1/2" x 5", from each red
- Cut 13: bias strips 1/2" x 5", from each blue
- Cut 4: 1" x 18" strips, blue, for the binding
- Cut 12: bias strips 1/2" x 5", silver lamé
- Cut 13: bias strips 1/2" x 5", gold lamé
DIRECTIONS
Begin with the red stripped units. Lay out 8 different 1/2" x
5" red bias strips, a 1/2" x 5" blue bias strip and a 1/2" x 5"
gold bias strip in any order you may choose, or refer to the photo for color placement.
|
- Lay the first 2 strips right sides together with their long side extending 1/8"
over the first line on the paper pattern. Pin the strips in place following 1/8" from
the first line. Use as many pins as you need to hold the strips along the curves.
|

|
|
|

|
- Flip to the fabric side of the unit. Remove the pins. Finger press the bias strips open.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To Printout the full size patterns for Patriotic Houndstooth Plaid, click here.
Back to Free Patterns Page.
|